Handyman RS makes custom kitchens in Novi Sad, turnkey: moisture-resistant carcasses, MDF fronts, Blum/Hettich hardware, on-site assembly and fitting of the sink and appliances. €400–900 per linear metre, warranty of up to 6 months. Send your measurements and photos in a messenger.
A custom kitchen in Novi Sad costs €400–900 per linear metre: a small one up to 3 m starts from 250,000 RSD, 4–5 m from 400,000 RSD, a kitchen with an island from 700,000 RSD. The price covers the whole cycle from measuring to installation and built-in appliances, with a warranty of up to 6 months. Send the measurements and a photo of the room on WhatsApp, Telegram or Viber: we will agree on a measuring visit and the master will pick materials to fit your budget.
Project: a compact corner kitchen for a cottage veranda
L-shaped kitchen 180 × 220 cm for a cottage veranda. Carcasses in laminated chipboard with a natural wood finish, all doors on soft-close hinges. The worktop has cut-outs for the gas hob and the sink. Storage: four drawers, two of them large ones under the hob for pots and bulky dishes. Because the kitchen is small, it was assembled right on site.
All custom furniture →| Service | Description | Price |
|---|---|---|
| Linear metre of kitchen | Carcasses, fronts, worktop, hardware and installation. The total depends on the fronts, the worktop and the number of drawer systems | €400–900 / linear m |
| Small project, up to 3 m | A compact straight or corner kitchen for a small apartment or cottage | from 250,000 RSD |
| Mid-size project, 4–5 m | A full kitchen with upper and lower rows of cabinets and built-in appliances | from 400,000 RSD |
| Premium with an island | A kitchen with an island; an island needs at least 15–18 m², on a smaller area we offer a peninsula or a breakfast bar | from 700,000 RSD |
A corner kitchen is usually 25–30% more expensive than a straight one of the same length. The price includes the full cycle, from measuring to final installation, with a warranty of up to 6 months.
Materials and hardware included in the price per metre
We don't use cheap particleboard that swells from water near the sink. The carcasses don't sag over time.
Enamel-painted MDF or HPL laminate doesn't peel from steam and is easy to wipe clean. Acrylic keeps its gloss and doesn't turn yellow.
Soft-close hinges and runners are rated for more than 100,000 openings and last 15–20 years.
Laminate or quartz — quartz costs more. The cut-outs for the sink and hob are made on site.
Carousels and magic corners use the whole corner, which is why a corner kitchen costs 25–30% more than a straight one.
We fit the sink and hob, build in the oven and dishwasher: the kitchen is ready to use straight away.
From a message in a messenger to a finished work area
The master comes at a convenient time, takes the measurements, checks the walls, pipes and sockets and suggests materials within your budget.
We agree on the layout, fronts, worktop and the number of drawers: they determine the final price.
Carcasses and fronts are made to the design's dimensions; we name the installation date in advance.
Assembly on site, fitting to uneven walls, cutting in the sink and hob, building in the appliances.
Manufacturing usually takes 14–28 days. The exact time depends on our workshop's workload; we confirm the installation date when the quote is agreed. We work every day from 08:00 to 20:00.
Click a photo to enlarge it
Real Google Maps reviews: furniture, plumbing, electrics
Заказывал шкаф из ЛДСП, и остался очень довольны! Всё от замеров до установки — прошло хорошо. Мастера работают профессионально, сразу видно, что знают своё дело.
Отличный мастер, быстрая и качественная работа
Спасибо мастеру Илье, оперативно приехал и заменил смесители!
1) Jedini majstor kog sam kontaktirala da je bez problema pristao da mi pomogne u popravci
2) Zakazali smo sve vrlo jednostavno i veoma kratkom roku
3) Dosao je na adresu, utvrdio problem, kroz sat vremena je bio nazad na mojoj adresi sa svim neophodnim delovima koji su trebali i vec popravljenim fiokama
4) Cena veoma povoljna!
5) I kao slag na tortu, izuzetno drag covek :)
Samo reci hvale, sigurno cemo njega odmah pozvati sledeci put kad nam treba pomoc 🍀
Sjajna cena i posao, veoma sam zadovoljan radom odrađenim
Needed a kitchen faucet replaced. Sent pictures of the current and replacement faucets and sink via WhatsApp. Had a response from Ilya the plumber within a couple hours. Arranged an appointment the following day, as this was not an emergency. Ilya worked around my schedule as well. Showed up right on time and did an excellent job swapping the faucets. Even did a little extra in my bathroom which was much appreciated. The best service I have experienced in Novi Sad to date. Highly recommended and will definitely use this service in the future if needed.
В городе Нови-Сад заказывала очень срочный сантехнический ремонт.
Мастер Илья приехал быстро. Определил проблему и способы её решения. Купил всё необходимое.
Тщательно отремонтировал сложное место протечки с дополнительным демонтажом и монтажом мешавшего доступу к месту ремонта унитаза.
Оставил все необходимые рекомендации и на следующее утро поинтересовался, нет ли проблем.
Качество ремонта превосходное.
Отношение мастера к клиенту и качеству своей работы выше всяческих похвал.
Искренне рекомендую!
В Носи Саде заказывал восстановить часть шуткатурки и краски на стене - работы сделаны быстро и аккуратно, после высыхания ни каких следов.
Илья хорошо помог с починкой дивана! Рекомендую!!!
В городе Нови Сад, заказывал ремонт нескольких розеток и выключателей. Мастер приехал, все быстро сделал. Спасибо
A ready-made modular kitchen is cheaper but limited to standard sizes. A custom kitchen is a long-term investment: every centimetre of the room is used, the carcasses are moisture-resistant and the Blum/Hettich hardware serves for 15–20 years. At €400–900 per metre you pay for no gaps, ergonomics tailored to you and premium materials.
Quality kitchen furniture costs from €400 to €900 per linear metre in 2026. A small project (up to 3 m) starts from 250,000 RSD, a mid-size one (4–5 m) from 400,000 RSD, and a premium kitchen with an island from 700,000 RSD. The price includes the full cycle, from measuring to final installation, with a warranty of up to 6 months.
It comes down to the components: we don't use cheap particleboard that swells from moisture. The price includes painted MDF fronts, high-strength worktops, concealed fixings and soft-close mechanisms, plus the master's handwork fitting the kitchen to uneven walls and pipes.
A corner kitchen is usually 25–30% more expensive than a straight one of the same length, because of the corner mechanisms (carousels, magic corners) and the more complex worktop joint. For small apartments in Novi Sad it is still the best way to get a larger work area.
The main factors are the front material (veneer and enamel cost more than film), the worktop (quartz costs more than laminate) and the number of drawer systems. The more soft-close drawers instead of hinged doors, the higher the comfort and the price.
For Novi Sad, with its changes in humidity, we recommend enamel-painted MDF or HPL laminate. They don't peel, resist steam and are easy to clean. Acrylic fronts also keep their gloss well and don't turn yellow over time.
With proper care it keeps its original look for 15–20 years. The main difference from cheap options is that the carcasses don't sag and the hinges withstand more than 100,000 opening cycles.
Yes. With a turnkey kitchen we cut in the sink and hob and build in the oven and dishwasher. You get a work area that is ready to use.
A full island needs at least 15–18 m². If there is less space, we offer a peninsula or a breakfast bar, which does the same job and takes up less room.
Service areas
Send the measurements or a photo of the kitchen on WhatsApp, Telegram or Viber and we will agree on a day for measuring.
Leave a request through the form or message us. We will help with fronts and worktops and book a measuring visit.
